EDIT_PAR COMMAND FILE

DI_MODE         LONG
ED_ENTRY        ACQU
ORDER           FILE


HEADER		"F2 - Acquisition Parameters"
NAME		PULPROG
		EXTFUNCT "lists/pp"
END
NAME		TD
END
NAME		NS
END
NAME		DS
END
T_NAME		SWH
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"SWH=SW*SFO1"
		INV_REL "SW=SWH/SFO1"
		UNIT	"Hz"
		FORMAT	"%14.2f Hz"
		TEXT	"sweep width in Hz"
END
T_NAME          AQ
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"AQ=aqcalc(SW,SFO1,TD,DIGTYP)"
		INV_REL	"TD=tdcalc(SW,SFO1,1.0e6*AQ,DIGTYP)"
		UNIT	"sec"
		FORMAT	"%14.7f sec"
                TEXT	"acquisition time"
END
NAME		RG
END
T_NAME          DW
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"DW=1/(2*SW*SFO1)"
		INV_REL	"SW=1000000/(2*(0.005+DW)*SFO1)"
		UNIT	"usec"
		FORMAT	"%14.3f usec"
		TEXT	"dwell time "
END
NAME		DE
		FORMAT	"%14.2f usec"
END
T_NAME		CNST21
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"CNST21=CNST[21]"
		INV_REL	"CNST[21]=CNST21"
		FORMAT	"%14.7f"
TEXT		"CO chemical shift (offset, in ppm)"
END
T_NAME		d0
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d0=3u"
		INV_REL	"D[0]=d0"
		UNIT	"sec"
		TEXT	"d0=3u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		D1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"D1=D[1]"
		INV_REL	"D[1]=D1"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"relaxation delay; 1-5 * T1"
END
T_NAME		d10
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d10=d23/2-p14/2"
		INV_REL	"D[0]=d10"
		UNIT	"sec"
		TEXT	"d10=d23/2-p14/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d11
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d11=30m"
		INV_REL	"D[0]=d11"
		UNIT	"sec"
		TEXT	"d11=30m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d13
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d13=4u"
		INV_REL	"D[0]=d13"
		UNIT	"sec"
		TEXT	"d13=4u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		D16
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"D16=D[16]"
		INV_REL	"D[16]=D16"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"delay for homospoil/gradient recovery"
END
T_NAME		d21
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d21=5.5m"
		INV_REL	"D[0]=d21"
		UNIT	"sec"
		TEXT	"d21=5.5m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d23
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d23=12.4m"
		INV_REL	"D[0]=d23"
		UNIT	"sec"
		TEXT	"d23=12.4m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d26
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d26=2.3m"
		INV_REL	"D[0]=d26"
		UNIT	"sec"
		TEXT	"d26=2.3m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d28
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d28=3.6m"
		INV_REL	"D[0]=d28"
		UNIT	"sec"
		TEXT	"d28=3.6m"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d29
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d29=d23/2-p14/2-p26-d21-4u"
		INV_REL	"D[0]=d29"
		UNIT	"sec"
		TEXT	"d29=d23/2-p14/2-p26-d21-4u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		d30
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"d30=d23/2-p14/2"
		INV_REL	"D[0]=d30"
		UNIT	"sec"
		TEXT	"d30=d23/2-p14/2"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA1
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA1=p16+d16+d13+4u"
		INV_REL	"D[0]=DELTA1"
		UNIT	"sec"
		TEXT	"DELTA1=p16+d16+d13+4u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA2
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA2=d23-d21-p26"
		INV_REL	"D[0]=DELTA2"
		UNIT	"sec"
		TEXT	"DELTA2=d23-d21-p26"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA3
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA3=d0*2+larger(p14,p22)-p14"
		INV_REL	"D[0]=DELTA3"
		UNIT	"sec"
		TEXT	"DELTA3=d0*2+larger(p14,p22)-p14"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		DELTA4
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"DELTA4=d21-p16-d16-4u"
		INV_REL	"D[0]=DELTA4"
		UNIT	"sec"
		TEXT	"DELTA4=d21-p16-d16-4u"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		IN0
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"IN0=IN[0]"
		INV_REL	"IN[0]=IN0"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"1/(2 * SW(Cali)) =  DW(Cali)"
END
T_NAME		IN10
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1e38
		REL	"IN10=IN[10]"
		INV_REL	"IN[10]=IN10"
		UNIT	"sec"
		FORMAT	"%14.8f sec"
TEXT		"1/(4 * SW(N)) = (1/2) DW(N)"
END
T_NAME		in29
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"in29=in10"
		INV_REL	"D[0]=in29"
		UNIT	"sec"
		TEXT	"in29=in10"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		in30
		TYPE	R32
		SUBRANGE 0.0 1e8
		CLASS	ACQU
		REL	"in30=in10"
		INV_REL	"D[0]=in30"
		UNIT	"sec"
		TEXT	"in30=in10"
		FORMAT	"%14.8f sec"
		NONEDIT
END
T_NAME		ST1CNT 
		TYPE	I32
		SUBRANGE 0 2147483647
		CLASS	ACQU
		REL	"ST1CNT = td1 / (2)"
		INV_REL	"D[0]=ST1CNT "
		UNIT	"no"
		TEXT	"ST1CNT = td1 / (2)"
		FORMAT	"%14d"
		NONEDIT
END
T_NAME		ST2CNT 
		TYPE	I32
		SUBRANGE 0 2147483647
		CLASS	ACQU
		REL	"ST2CNT = td2 / (2)"
		INV_REL	"D[0]=ST2CNT "
		UNIT	"no"
		TEXT	"ST2CNT = td2 / (2)"
		FORMAT	"%14d"
		NONEDIT
END
HEADER		"======== CHANNEL f1 ========"
NAME		CPDPRG1
		TEXT	"file name for cpd1"
		EXTFUNCT "lists/cpd"
END
NAME		NUC1
		NONEDIT
		TEXT	"nucleus for channel 1"
END
T_NAME		P1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P1=P[1]"
		INV_REL	"P[1]=P1"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel -  90 degree high power pulse"
END
T_NAME		P2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P2=P[2]"
		INV_REL	"P[2]=P2"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel - 180 degree high power pulse"
END
T_NAME		P11
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P11=P[11]"
		INV_REL	"P[11]=P11"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel -  90 degree shaped pulse             [2 msec]"
END
T_NAME		P26
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P26=P[26]"
		INV_REL	"P[26]=P26"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel -  90 degree pulse at pl19"
END
T_NAME		PCPD1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0 1e38
		REL	"PCPD1=PCPD[1]"
		INV_REL	"PCPD[1]=PCPD1"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f1 channel - 90 degree pulse for decoupling sequence"
END
T_NAME		PL0
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL0=PL[0]"
		INV_REL	"PL[0]=PL0"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"120dB"
END
T_NAME		PL1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL1=PL[1]"
		INV_REL	"PL[1]=PL1"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f1 channel - power level for pulse (default)"
END
T_NAME		PL19
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL19=PL[19]"
		INV_REL	"PL[19]=PL19"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f1 channel - power level for CPD/BB decoupling"
END
NAME		SFO1
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
T_NAME		SP1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP1=SP[1]"
		INV_REL	"SP[1]=SP1"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f1 channel - shaped pulse  90 degree  (H2O on resonance)"
END
NAME		SPNAM1
		TEXT	"file name for sp0"
		EXTFUNCT "lists/wave"
END
T_NAME		SPOAL1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL1=SPOAL[1]"
		INV_REL	"SPOAL[1]=SPOAL1"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP1"
END
T_NAME		SPOFFS1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1e38 1e38
		REL	"SPOFFS1=SPOFFS[1]"
		INV_REL	"SPOFFS[1]=SPOFFS1"
		UNIT	"Hz"
		FORMAT	"%14.2f Hz"
		TEXT	"offset frequency for SP1"
END
HEADER		"======== CHANNEL f2 ========"
NAME		NUC2
		NONEDIT
		TEXT	"nucleus for channel 2"
END
T_NAME		P13
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P13=P[13]"
		INV_REL	"P[13]=P13"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel -  90 degree shaped pulse"
END
T_NAME		P14
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P14=P[14]"
		INV_REL	"P[14]=P14"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f2 channel - 180 degree shaped pulse"
END
T_NAME		PL2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL2=PL[2]"
		INV_REL	"PL[2]=PL2"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
		TEXT	"power Pl2 "
END
NAME		SFO2
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
T_NAME		SP2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP2=SP[2]"
		INV_REL	"SP[2]=SP2"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - shaped pulse  90 degree  (Cali on resonance)"
END
T_NAME		SP3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP3=SP[3]"
		INV_REL	"SP[3]=SP3"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - shaped pulse 180 degree  (Cali on resonance)"
END
T_NAME		SP5
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP5=SP[5]"
		INV_REL	"SP[5]=SP5"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - shaped pulse 180 degree  (C=O off resonance)"
END
T_NAME		SP8
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 120
		REL	"SP8=SP[8]"
		INV_REL	"SP[8]=SP8"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f2 channel - shaped pulse  90 degree  (Cali on resonance)"
END
NAME		SPNAM2
		TEXT	"file name for sp0"
		EXTFUNCT "lists/wave"
END
NAME		SPNAM3
		TEXT	"file name for sp0"
		EXTFUNCT "lists/wave"
END
NAME		SPNAM5
		TEXT	"file name for sp0"
		EXTFUNCT "lists/wave"
END
NAME		SPNAM8
		TEXT	"file name for sp0"
		EXTFUNCT "lists/wave"
END
T_NAME		SPOAL2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL2=SPOAL[2]"
		INV_REL	"SPOAL[2]=SPOAL2"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP2"
END
T_NAME		SPOAL3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL3=SPOAL[3]"
		INV_REL	"SPOAL[3]=SPOAL3"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP3"
END
T_NAME		SPOAL5
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL5=SPOAL[5]"
		INV_REL	"SPOAL[5]=SPOAL5"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP5"
END
T_NAME		SPOAL8
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -1.0 1.0
		REL	"SPOAL8=SPOAL[8]"
		INV_REL	"SPOAL[8]=SPOAL8"
		FORMAT	"%14.3f"
		TEXT	"phase alignment of freq. offset in SP8"
END
T_NAME		spoff2
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"spoff2=0"
		INV_REL	"D[0]=spoff2"
		UNIT	"Hz"
		TEXT	"spoff2=0"
		FORMAT	"%14.2f Hz"
		NONEDIT
END
T_NAME		spoff3
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"spoff3=0"
		INV_REL	"D[0]=spoff3"
		UNIT	"Hz"
		TEXT	"spoff3=0"
		FORMAT	"%14.2f Hz"
		NONEDIT
END
T_NAME		spoff5
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"spoff5=bf2*(cnst21/1000000)-o2"
		INV_REL	"D[0]=spoff5"
		UNIT	"Hz"
		TEXT	"spoff5=bf2*(cnst21/1000000)-o2"
		FORMAT	"%14.2f Hz"
		NONEDIT
END
T_NAME		spoff8
		TYPE	R32
		SUBRANGE -1e38 1e38
		CLASS	ACQU
		REL	"spoff8=0"
		INV_REL	"D[0]=spoff8"
		UNIT	"Hz"
		TEXT	"spoff8=0"
		FORMAT	"%14.2f Hz"
		NONEDIT
END
HEADER		"======== CHANNEL f3 ========"
NAME		CPDPRG3
		TEXT	"file name for cpd3"
		EXTFUNCT "lists/cpd"
END
NAME		NUC3
		NONEDIT
		TEXT	"nucleus for channel 3"
END
T_NAME		P21
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P21=P[21]"
		INV_REL	"P[21]=P21"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f3 channel -  90 degree high power pulse"
END
T_NAME		P22
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P22=P[22]"
		INV_REL	"P[22]=P22"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f3 channel - 180 degree high power pulse"
END
T_NAME		PCPD3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0 1e38
		REL	"PCPD3=PCPD[3]"
		INV_REL	"PCPD[3]=PCPD3"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"f3 channel - 90 degree pulse for decoupling sequence"
END
T_NAME		PL3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL3=PL[3]"
		INV_REL	"PL[3]=PL3"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f3 channel - power level for pulse (default)"
END
T_NAME		PL16
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -6.0 1e38
		REL	"PL16=PL[16]"
		INV_REL	"PL[16]=PL16"
		UNIT	"dB"
		FORMAT	"%14.2f dB"
TEXT		"f3 channel - power level for CPD/BB decoupling"
END
NAME		SFO3
		FORMAT	"%14.7f MHz"
		TEXT	"frequency of observe channel"
END
HEADER		"====== GRADIENT CHANNEL ====="
NAME		GPNAM1
		EXTFUNCT "lists/gp"
TEXT		"SINE.100"
END
NAME		GPNAM2
		EXTFUNCT "lists/gp"
TEXT		"SINE.100"
END
NAME		GPNAM3
		EXTFUNCT "lists/gp"
TEXT		"SINE.100"
END
T_NAME		GPX1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPX1=GPX[1]"
		INV_REL	"GPX[1]=GPX1"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"x-gradient strength 1"
END
T_NAME		GPX2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPX2=GPX[2]"
		INV_REL	"GPX[2]=GPX2"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"x-gradient strength 2"
END
T_NAME		GPX3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPX3=GPX[3]"
		INV_REL	"GPX[3]=GPX3"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"x-gradient strength 3"
END
T_NAME		GPY1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPY1=GPY[1]"
		INV_REL	"GPY[1]=GPY1"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"y-gradient strength 1"
END
T_NAME		GPY2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPY2=GPY[2]"
		INV_REL	"GPY[2]=GPY2"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"y-gradient strength 2"
END
T_NAME		GPY3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPY3=GPY[3]"
		INV_REL	"GPY[3]=GPY3"
		UNIT	"%"
		FORMAT	"%14.2f %"
		TEXT	"y-gradient strength 3"
END
T_NAME		GPZ1
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ1=GPZ[1]"
		INV_REL	"GPZ[1]=GPZ1"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"30%"
END
T_NAME		GPZ2
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ2=GPZ[2]"
		INV_REL	"GPZ[2]=GPZ2"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"80%"
END
T_NAME		GPZ3
		TYPE	R32
		CLASS	ACQU
		SUBRANGE -100.0 100.0
		REL	"GPZ3=GPZ[3]"
		INV_REL	"GPZ[3]=GPZ3"
		UNIT	"%"
		FORMAT	"%14.2f %"
TEXT		"8.1%"
END
T_NAME		P16
		TYPE	R32
		CLASS	ACQU
		SUBRANGE 0.0 1.0e10
		REL	"P16=P[16]"
		INV_REL	"P[16]=P16"
		UNIT	"usec"
		FORMAT	"%14.2f usec"
TEXT		"homospoil/gradient pulse                         [1 msec]"
END