# 1 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"
;noesyhsqcgpsm3d.2
;avance-version (04/01/07)
;NOESY-HSQC
;3D sequence with
;   homonuclear correlation via dipolar coupling 
;   dipolar coupling may be due to noe or chemical exchange.
;   H-1/X correlation via double inept transfer
;   simultaneous evolution of C-13 and N-15 chemical shift in t2
;phase sensitive (t1)
;phase sensitive (t2)
;with decoupling during acquisition
;using shaped pulses for inversion on f2 - channel
;
;S.M. Pascal, D.R. Muhandiram, T. Yamazaki, J.D. Forman-Kay & L.E. Kay, 
;   J. Magn. Reson. B103, 197 - 201 (1994)

;(09/29/06) Modified by SB to include CO Decoupling and phase cycling 
;switched to eliminate axial peaks in F1 with >4 scans.
;Powerlevel (pl12) for Adiabatic decoupling using CHIRP95 = power level for garp decoupling + 3dB 
;Reduce power used for 15N Garp Decoupling to ~250 us for PCPD3 (800-900 MHz)
;Reduce power used for 15N Garp Decoupling to ~300 us for PCPD3 (500-700 MHz)
;SEQLIB Macro should not be used
;(09/14/09) Modified by Alexander Eletsky
;Removed CO decoupling
;Removed refocussed echo in t1 to improve broadband performance over Cali and Caro
;Evolution in t1 starts at half-dwell always!
;NS 4 phase cycle
;Restored p19 gradient pulse (was set to p16)
;BLKGRAD active during t1 and mix, inactive during acquisition
;Needed to prevent lock signal from being disturbed by simultaneous 15N/13C decoupling
;SEAD adiabatic decoupling sideband suppression option added
;E. Kupce JMR 129 p219 (1997)

;Took out inf statements
;added p61=p1
;added p18=1m gradient
;
;$CLASS=HighRes
;$DIM=3D
;$TYPE=
;$SUBTYPE=
;$COMMENT=
                                                                                


prosol relations=<triple>


# 1 "/opt/topspin/exp/stan/nmr/lists/pp/Avance.incl" 1
;Avance2.incl
;   for 1
;
;avance-version (07/01/22)
;
;$CLASS=HighRes Incl
;$COMMENT=





































































































































;$Id: Avance2.incl,v 1.10.6.7 2007/01/22 13:54:46 ber Exp $
# 49 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j" 2

# 1 "/opt/topspin/exp/stan/nmr/lists/pp/Grad.incl" 1
;Grad2.incl  -  include file for Gradient Spectroscopy
;   for 1
;
;avance-version (02/05/31)
;
;$CLASS=HighRes Incl
;$COMMENT=



















define list<gradient> EA=<EA>



;$Id: Grad2.incl,v 1.7.10.3 2007/02/06 13:54:12 ber Exp $
# 50 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j" 2

# 1 "/opt/topspin/exp/stan/nmr/lists/pp/Delay.incl" 1
;Delay.incl  -  include file for commonly used delays
;
;version 00/02/07
;
;$CLASS=HighRes Incl
;$COMMENT=


;general delays

define delay DELTA
define delay DELTA1
define delay DELTA2
define delay DELTA3
define delay DELTA4
define delay DELTA5
define delay DELTA6
define delay DELTA7
define delay DELTA8

define delay TAU
define delay TAU1
define delay TAU2
define delay TAU3
define delay TAU4
define delay TAU5


;delays for centering pulses

define delay CEN_HN1
define delay CEN_HN2
define delay CEN_HN3
define delay CEN_HC1
define delay CEN_HC2
define delay CEN_HC3
define delay CEN_HC4
define delay CEN_HP1
define delay CEN_HP2
define delay CEN_CN1
define delay CEN_CN2
define delay CEN_CN3
define delay CEN_CN4
define delay CEN_CP1
define delay CEN_CP2


;loop counters

define loopcounter COUNTER
define loopcounter SCALEF
define loopcounter FACTOR1
define loopcounter FACTOR2
define loopcounter FACTOR3



;$Id: Delay.incl,v 1.11.10.1 2005/11/10 13:18:56 ber Exp $
# 51 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j" 2





"p2=p1*2"

"p4=p3*2"

"p22=p21*2"

"p61=p1"

"d4=1s/(cnst2*4)"

"d0=3u"

"d11=30m"

"d12=20u"

"d26=1s/(cnst4*4)"


"p16=1m"
"p18=1m"
"p19=3m"
"p29=4m"

;"in0=inf1/2"
;"in10=inf2/2"
"in29=in30-in10"

"d10=in10/2-p1-(p3*2)/3.14159"
"d29=in30/2-(p21*2)/3.14159-p3-d10-p1"


"DELTA=d1-d11*4-6m"
"DELTA1=d4-p18-d16-p8/2"
"DELTA2=d26-d4"
;"DELTA4=d0*2+larger(p8,p22)"
"DELTA4=d0*2+larger(p8,(p22*2+2u))"

"TAU=d8-p19*2-d16*2-p3-50u"
"TAU2=(p8-p2)/2"
;"TAU3=(p8-p22)/2"
"TAU3=(p8-p22*2-2u)/2"







"DELTA3=d4-p18-d16-p8/2-p3*2-p21*2-d12-6u"


"spoff13=0"


aqseq 321


# 1 "mc_line 114 file /opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j expanding definition part of mc command before ze"
; dimension 3 aq-mode (F2) States-TPPI (F1) States-TPPI  F2->F1
define delay MCWRK
define delay MCREST
define loopcounter ST1CNT
"ST1CNT = td1 / (2)"
define loopcounter ST2CNT
"ST2CNT = td2 / (2)"
"MCWRK = 0.090909*d11"
"MCREST = d11 - d11"
# 114 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"
1 ze
# 1 "mc_line 114 file /opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j expanding definition of mc command after ze"
# 115 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"
  d11 pl12:f2 pl16:f3
# 1 "mc_line 116 file /opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j expanding start label for mc command"
2 MCWRK  * 2 do:f2 do:f3
LBLSTS2, MCWRK  * 2
LBLF2, MCWRK  * 6
LBLSTS1, MCWRK 
LBLF1, MCREST
# 117 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"
3 d12 pl10:f1 pl2:f2 pl3:f3
  p17 ph1
  p17*2 ph2
  50u setnmr3^0 setnmr0^34^32^33
  d1 pl1:f1 pl0:f2 pl3:f3


  50u setnmr3|0 setnmr0|34|32|33



  p16:gp7
  d16
  50u setnmr3^0 setnmr0^34^32^33

  (p1 ph3)
  DELTA4
  (p2 ph8)
  d0
  ;(center (p8:sp13 ph1):f2 (p22 ph1):f3 )
  (center (p8:sp13 ph1):f2 (p21 ph1 1u p22 ph2 1u p21 ph1):f3 )
  d0
  (p1 ph1)  
  TAU ;setnmr3|0 setnmr0|34|32|33


  50u setnmr3|0 setnmr0|34|32|33




  p19:gp1
  d16 pl2:f2 pl1:f1
  (p3 ph1):f2
  4u
  p16:gp2
  d16

  (p1 ph1)
  4u
  p16:gp3
  d16 pl0:f2
  DELTA1
  (lalign
   (DELTA2 TAU2 p2 ph1 TAU2)
   (p8:sp13 ph1):f2
   (DELTA2 TAU3 p21 ph1 1u p22 ph2 1u p21 ph1 TAU3):f3
  )
  DELTA2
  DELTA1
  4u
  p16:gp3
  d16
  (p1 ph2)

  4u
  p29:gp4
  d16 pl2:f2

  (p21 ph5):f3
  d29
  (p3 ph4):f2 
  d10
  (p2 ph1)
  d10
  (p3 ph1):f2
  d29
  (p21 ph1):f3 

  4u
  p19:gp5
  d16 

# 230 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"

 (p1 ph6)
  4u
  p18:gp6
  d16 pl0:f2
  DELTA1
  (lalign
   (DELTA2 TAU2 p2 ph1 TAU2):f1
   (p8:sp13 ph1):f2
   (DELTA2 TAU3 p21 ph1 1u p22 ph2 1u p21 ph1 TAU3):f3
  )
  DELTA2
  DELTA3
  4u
  p18:gp6
  d16 pl2:f2
  (p3 ph1 3u p3 ph7):f2
  (p21 ph1 3u p21 ph7):f3
  d12 pl12:f2 pl16:f3
  ;4u setnmr3^0 setnmr0^34^32^33
  (p61 ph6) 
  go=2 ph31 cpds2:f2 cpd3:f3

# 1 "mc_line 253 file /opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j expanding mc command in line"
  MCWRK  do:f2 do:f3 wr #0 if #0 zd ip4  MCWRK  ip5
  lo to LBLSTS2 times 2
  MCWRK id10  MCWRK  id29
  lo to LBLF2 times ST2CNT
  MCWRK rd10  MCWRK  rd29  MCWRK  rp4  MCWRK  rp5  MCWRK  ip3  MCWRK  ip8
  lo to LBLSTS1 times 2
  MCWRK id0
  lo to LBLF1 times ST1CNT
# 256 "/opt/topspin/exp/stan/nmr/lists/pp/AC_noesyhsqcgpsm3d.2_4.j"
  d11 setnmr3^0 setnmr0^34^32^33
exit
   

ph1=0 
ph2=1
ph3=0 0 2 2 
ph4=0 2 
ph5=2 0
ph6=0
ph7=0 0 2 2
ph8=1 1 3 3 
ph9=0 0 
ph31=0 2 2 0


;pl0 : 120dB
;pl1 : f1 channel - power level for pulse (default)
;pl2 : f2 channel - power level for pulse (default)
;pl3 : f3 channel - power level for pulse (default)
;pl10: f1 channel - power level for TOCSY-spinlock (trim pulse)
;pl12: f2 channel - power level for CPD/BB decoupling
;pl16: f3 channel - power level for CPD/BB decoupling
;sp13: f2 channel - shaped pulse 180 degree (adiabatic)
;sp26: f2 channel - SEAD shaped pulse (adiabatic)
;p1 : f1 channel -  90 degree high power pulse
;p2 : f1 channel - 180 degree high power pulse
;p3 : f2 channel -  90 degree high power pulse
;p4 : f2 channel - 180 degree high power pulse
;p8 : f2 channel - 180 degree shaped pulse for inversion (adiabatic)
;p13: f2 channel - SEAD pulse
;p16: homospoil/gradient pulse                       [1 msec]
;p17: f1 channel - trim pulse                        [4 msec]
;p18: homospoil/gradient pulse                       [1 msec]
;p19: gradient pulse 2                               [3 msec]
;p21: f3 channel -  90 degree high power pulse
;p22: f3 channel - 180 degree high power pulse
;p29: gradient pulse 3                               [4 msec]
;p61: H2O flipback pulse
;d0 : incremented delay (F1 in 3D)                   [3 usec]
;d1 : relaxation delay; 1-5 * T1
;d4 : 1/(4J(CH))
;d8 : mixing time
;d10: incremented delay (F2 in 3D)                   [3 usec]
;d11: delay for disk I/O                             [30 msec]
;d12: delay for power switching                      [20 usec]
;d16: delay for homospoil/gradient recovery
;d26: 1/(4J(NH))
;d29: decremented delay (F2 in 3D)                   [3 usec]
;cnst2: = J(CH)
;cnst4: = J(NH)
;cnst63: = SEAD steps
;in0: 1/(2 * SW(H)) =  DW(H)
;nd0: 2
;in10: 1/(2 * SW(C)) = DW(C)
;nd10: 2
;in29: in30 - in10
;in30: 1/(2 * SW(N)) = DW(N)
;NS: 4 * n
;DS: >= 16
;td1: number of experiments in F1
;td2: number of experiments in F2
;FnMODE: States-TPPI (or TPPI) in F1
;FnMODE: States-TPPI (or TPPI) in F2
;cpd2: decoupling according to sequence defined by cpdprg2
;cpd3: decoupling according to sequence defined by cpdprg3
;pcpd2: f2 channel - 90 degree pulse for decoupling sequence
;pcpd3: f3 channel - 90 degree pulse for decoupling sequence


;use gradient ratio:    gp 1 : gp 2 : gp 3 : gp 4 : gp 5 : gp 6 : gp 7
;                         30 :   40 :   16 :   60 :  -36 :   16 :   50

;for z-only gradients:
;gpz1: 30%
;gpz2: 40%
;gpz3: 16%
;gpz4: 60%
;gpz5: -36%
;gpz6: 16%
;gpz7: 50%

;use gradient files:   
;gpnam1: SINE.100
;gpnam2: SINE.100
;gpnam3: SINE.100
;gpnam4: SINE.100
;gpnam5: SINE.100
;gpnam6: SINE.100
;gpnam7: SINE.100


;$Id: noesyhsqcgpsm3d.2,v 1.2 2004/01/22 14:58:58 ber Exp $